GREPhysics.NET: GR9677 #13

GR9677 #13

Problem

GREPhysics.NET Official Solution

This problem is still being typed.

Thermodynamics $\Rightarrow$ }Heat

Given $P=100$ W and $V=1L=1m^3=1kg$ for water, one can chunk out the specific heat equation for heat, $Q=mc\Delta T=Pt\Rightarrow 4200(1^\circ) = 100t\Rightarrow t \approx 40 s$ , as in choice (B).

Alternate Solutions

There are no Alternate Solutions for this problem. Be the first to post one!

Comments

benjamin_DW
2016-10-27 14:18:09

What\'s not clear to me is why the substance **must** cool at the same rate that we heated it. Just because we heated it at a rate of 100W does not mean it will necessarily cool at a rate of 100W. In fact, by Newton\'s law of cooling, the temperature $\\Phi(t)$ is given by: \r\n\r\n $\\frac{d\\phi}{dt} = -\\kappa (\\Phi - \\Phi_{0})$ \r\n\r\nWhere $\\Phi(0)$ is the background temperature, and $\\kappa$ is a constant dependent on the geometry of the material.[and even this of course, is an approximation]

rweads
2017-04-30 01:28:20

since the liquid does not boil, and the heat element has been in the water for a long time, the system must be in thermal equilibrium where the rate of heat added is equal to the rate that heat is dissipated. It is then very reasonable that for small deviations from that equilibrium temperature the rate of heat loss will be the same.

yummyhat
2017-10-27 22:44:30

thanks rweads (and einstein)

Reply to this comment

cczako
2013-10-17 17:07:38

The easiest way to do this is to use units. 4200 J/ kg C times 1 C and 1 kg (1L=1kg) is 4200 J. Watts is Joules per second so divide 4200 J by 100 J/s and you get 42 s.

Reply to this comment

asafparis
2009-04-02 13:10:33

$1L$ of water is not $1m^3$

shak
2010-08-14 09:51:27

1 L of water is exactly one cubic meter!
m= v*r

BerkeleyEric
2010-09-21 19:13:11

1 liter is equal to 0.001 cubic meters, which does correspond to 1 kg for water

Rtrt
2015-10-13 08:49:28

yes . 1L is 1 kg but it is not 1m^3. density of water is 1000 kg/m^3. 1 L is 0.001 m^3. So mass is 1 kg.

Reply to this comment

naama99
2006-11-21 08:18:36

Since the formula for specific heat c has delta T in it, why do you take 1 degree as delta T instead of 99?

welshmj
2007-07-31 14:37:33

because the problem says that it cools by 1 degree not that it cools TO 1 degree which means that the change in temperature (delta T) is 1 degree not 99 degrees.

Reply to this comment

vortex
2005-12-04 16:09:10

$1L=1dm^3$ not $1 m^3$ ,and an arrow would be better before 1 kg.

Reply to this comment

yosun
2005-11-10 23:32:23

angiep: the specific heat of water is 4200 J/kg and not 2200. thanks for the typo-alert.

Reply to this comment

angiep
2005-11-10 23:14:50

I dont feel like this problem makes any sense at all. It is worded completely wrong.

einstein
2006-03-31 02:32:57

In fact it is worded perfectly correctly. The statement that the 100-Watt heating element remains for a long time but the water does not boil informs us that the water must be disipating the energy at precisely this rate. Hence P_{out} =100W

Imperate
2008-09-04 09:02:50

I can see it makes sense now thanks to einstein's comment. However I have to agree that this question is worded very badly. The sentance "the heating element is on for a long time and the water although close to boiling does not boil" makes it sound like the water heats up to being close to boiling, not that the water started close to being at boiling point and despite the heaters presence,did not boil.rnWould have been much better to say the temperature of the water remains static, despite heater of 100W being placed in it.

tachyon788
2009-10-06 09:58:33

I agree with Imperate. I thought the question meant that the heater heated the water (and increased the temperature) until it was removed right before the water started to boil. In that case, the whole heater thing seemed like a red herring. With only 1.7 minutes per question, we don't really have time to decipher poorly worded questions...

hdcase
2009-11-01 22:06:40

I disagree with Imperiate. The question isn't saying that the water started at close to boiling - rather, it is saying that the steady state of the system is such that at the steady state temperature (which is close to 100 C) the system is losing 100 W. I think it is worded in such a way that one can glean that information without it having to be stated directly.

Reply to this comment

Post A Comment!

You are replying to:

Bare Basic LaTeX Rosetta Stone
LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces $\alpha^2_0$ .
type this...	to get...
$\int_0^\infty$	$\int_0^\infty$
$\partial$	$\partial$
$\Rightarrow$	$\Rightarrow$
$\ddot{x},\dot{x}$	$\ddot{x},\dot{x}$
$\sqrt{z}$	$\sqrt{z}$
$\langle my \rangle$	$\langle my \rangle$
$\left( abacadabra \right)_{me}$	$\left( abacadabra \right)_{me}$
$\vec{E}$	$\vec{E}$
$\frac{a}{b}$	$\frac{a}{b}$

The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...

All-Solutions List | Latest Comments | Unanswered Questions (Cries for Help!) |::| About

This site is not affiliated with ETS, nor is it officially endorsed (yet) by ETS. This site is the work of an individual named Yosun Chang. The solutions, sans user comments and ETS questions, are © 2005 by Yosun Chang except where noted. All rights reserved. / The comments appending particular solutions are due to the respective users. / Educational Testing Service, ETS, the ETS logo, Graduate Record Examinations, and GRE are registered trademarks of Educational Testing Service. The examination questions are © 1997 and © 2001 by ETS.

Bare Basic LaTeX Rosetta Stone