GREPhysics.NET: GR9277 #8

GR9277 #8

Problem

GREPhysics.NET Official Solution

\prob{8}

A solid cone hangs from a frictionless pivot at the origin O, as shown above. If $\hat{i}$ , $\hat{j}$ , $\hat{k}$ are unit vectors, and a, b, and c are positive constants, which of the following forces $\vec{F}$ applied to the rim of the cone at a point P results in a torque $\tau$ on the cone with a negative component $\tau_z$ ?

$\vec{F}=a\hat{k}$ , P is (0,b,-c)
$\vec{F}=-a\hat{k}$ , P is (0,-b,-c)
$\vec{F}=a\hat{j}$ , P is (-b,0,-c)
$\vec{F}=a\hat{j}$ , P is (b,0,-c)
$\vec{F}=-a\hat{k}$ , P is (-b,0,-c)

Mechanics $\Rightarrow$ }Torque

The problem wants a negative $z$ component for $\tau$ . Recall that $r \times F=0$ whenever $r$ and $F$ are parallel (or antiparallel). Thus, choices (A), (B), (E) are immediately eliminated. One can work out the cross-product to find that (D) yields a positive $\tau_z$ , thus (C) must be it.

Alternate Solutions

BerkeleyEric
2010-09-14 15:29:40

The z-component of the torque (if you write out the cross product) is $xF_y - y F_x$ . A, B, and E can be immediately thrown out since there is no $F_x$ or $F_y$ component, and then you can just check to see that C gives the write sign.

Reply to this comment

Comments

Mall-Saint
2016-10-22 17:08:05

For a torque with a negative z component, the base of cylinder must be rotating clockwise as viewed from above (by the right hand rule). This can be given by a force applied in the y direction to a point on the far side of the base. Hence (C).

Reply to this comment

hooverbm
2012-10-05 08:21:01

For those who are getting confused, for some reason I looked at this problem as if the z-direction were out of the page (force of habit). Clearly z is up/down in the plane of the page.

Torque = r X F and when you determine the direction, point your fingers along the direction of "r" and curl through the smallest of the two angles toward "F". Your thumb is the direction of the torque.

You can go through each option fairly quickly. You soon discover that if F is directed along "y", the only way to get a torque that is in the negative "z" is if the "r" has components into the page (-x direction). Thus C.

Reply to this comment

Setareh
2011-11-08 14:15:47

I really don't understand how you say r and F are parallel in A, B and E...!

Reply to this comment

alimerzairan
2011-10-14 16:31:48

this is just a test of the right-hand rule.

r = thumb

F = index finger

torque = middle finger

we know that the (A), (B), and (E) can't be true, otherwise the cross product will be 0.

And they want the torque to be in the -z direction. So point your middle finger to the -z direction and you find that the r vector must be in the -i direction. This means a negative x-value which is present in (C).

Reply to this comment

jondiced
2010-11-03 14:15:18

Remember that $\tau = r \times F$ , not $F \times r$ ! Oops.

Reply to this comment

BerkeleyEric
2010-09-14 15:29:40

QuantumCat
2014-09-01 12:06:50

That's exactly how I solved this problem. I noted that to get $- \hat z$ , you have to have a negative $x$ crossed with $y$ or $x$ crossed with negative $y$ . Since C & D are the only answer choices with a force not in the $\hat z$ direction, and the force in C & D is the in the $+\hat y$ direction, you must have a negative $x$ component, $\it a$ $\it la$ C.

Tl;dr: to get $- \hat z$ you have to have $- \hat x$ $\times$ $- \hat y$ for the given force choices.

QuantumCat
2014-09-01 12:08:42

Crap, accidentally put a minus sign in the cross product. It should read: $- \hat x$ $\times$ $\hat y$

Reply to this comment

yosun
2007-06-01 23:07:02

test

Reply to this comment

RebeccaJK42
2007-03-22 11:16:55

Does the R vector point from O to P or P to O?

yosun
2007-06-01 23:06:19

R would point from O to P, of course. Recall the right hand rule, and the two axe vectors ( $\vec{r}$ and $\vec{F}$ ) that spawn from the same origin.

Reply to this comment

Post A Comment!

You are replying to:

Bare Basic LaTeX Rosetta Stone
LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces $\alpha^2_0$ .
type this...	to get...
$\int_0^\infty$	$\int_0^\infty$
$\partial$	$\partial$
$\Rightarrow$	$\Rightarrow$
$\ddot{x},\dot{x}$	$\ddot{x},\dot{x}$
$\sqrt{z}$	$\sqrt{z}$
$\langle my \rangle$	$\langle my \rangle$
$\left( abacadabra \right)_{me}$	$\left( abacadabra \right)_{me}$
$\vec{E}$	$\vec{E}$
$\frac{a}{b}$	$\frac{a}{b}$

The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...

All-Solutions List | Latest Comments | Unanswered Questions (Cries for Help!) |::| About

This site is not affiliated with ETS, nor is it officially endorsed (yet) by ETS. This site is the work of an individual named Yosun Chang. The solutions, sans user comments and ETS questions, are © 2005 by Yosun Chang except where noted. All rights reserved. / The comments appending particular solutions are due to the respective users. / Educational Testing Service, ETS, the ETS logo, Graduate Record Examinations, and GRE are registered trademarks of Educational Testing Service. The examination questions are © 1997 and © 2001 by ETS.

Bare Basic LaTeX Rosetta Stone