GREPhysics.NET
GR | #
<< Previous | Next >>
Login | Register
   
  GR0177 #86
Problem
GREPhysics.NET Official Solution    Alternate Solutions
This problem is still being typed.
Electromagnetism}Faraday Law

The voltage induced is equal to the change in magnetic flux \epsilon = -\frac{\partial \Phi}{\partial t}, where \Phi =\int \vec{B} \cdot d\vec{A}.

Noting the initial condition (\Phi(t=0)=0), since the field and area normal are perpendicular), one finds that B \cdot dA = B \sin(\omega t) \pi r^2. Thus, d\Phi/dt = \omega B \cos(\omega t) \pi r^2.

Now, to find the current, one uses Ohm's Law in Faraday's Law to get IR/N=\dot{\Phi}, where N is the number of turns. Thus, I = N/R \dot{\Phi} = NB\omega / R \cos(\omega t) \pi r^2 = 15/2 \times 300/9 \cos(\omega t) \pi (1/100)^2=250E-4\cos(\omega t). This is choice (E).



See below for user comments and alternate solutions! See below for user comments and alternate solutions!
Alternate Solutions
There are no Alternate Solutions for this problem. Be the first to post one!
Comments
Copperknickers
2016-07-08 06:46:05		Is there a simpler way to figure out the cos(wt), sin(wt) part? Without having to remember any formula by rote, that is? asdfman\'s solutions seems nice. Any alternative ones?
asdfasdfasdf
2016-09-07 14:53:11		 I\'m not sure there\'s a simpler way to figure out the trig part. The only \"memorization\" needed is: (a) what are sin(0) and cos(0)? (b) what is the derivative of sin(wt) or cos(wt)? The question provides the initial condition of the n vector being parallel to the y-axis. When that is the case, there is no magnetic flux through the coil, right? So, when t=0, we should have B=0. sin(0)=0, so we\'ll use sine, not cosine. And you know you need to use some sort of periodic function since it\'s rotating...once it rotates such that the n vector lies parallel to the x-axis, we have the maximum flux possible, right? sin(90)=1, so that confirms that we should use sine.Then, since we get our emf from d(phi)/dt, we need the derivative of sin(wt), which is w*cos(wt).Does that help? [also, sorry if this text gets garbled...I\'m not sure why slashes are being randomly inserted.]
NEC
John Smith
2013-10-17 02:02:09		I am a foreigner, the time when I solve this question, I can hardly notice that the FUNK MILLIamperes. That will cost me lots of time if it happened in the real test. NEC
asdfman
2009-11-02 23:47:03		it says the coil starts at \theta = 0 which means \phi (0) = 0 and therefore a \sin function.

\frac{d \phi}{d t} must therefore be a cosine.

Do some algebra and you realize that it'll be something like 1.5^2, so it'll have something ~2.25 or 2.5. The only answer that fits the bill is E.		NEC
theevilmachines
2009-07-12 17:58:53		I don't know about you guys, but my 0177 test doesn't have 0.025\pi\cos(\omega t) as an answer choice. Choice E is 25\pi\cos(\omega t). Am I missing something?
theevilmachines
2009-08-24 15:31:09		 Oh it says in milliamperes, not amperes.
NEC
duckduck_85
2008-11-03 22:20:12		how do you know that the resistance given in the problem isn't for the entire coil? (so that you needn't take the # of turns into account)
elzoido238
2008-11-07 19:17:30		 The problem states that "...the coil resistance is 9 \Omega, which I interpret as the resistance of the entire coil. Since Yosun found the flux for 1 turn of the coil, you would need to account for the number of turns in the coil by dividing the total resistance by N (if, however one found the flux for the entire coil - i.e. \Phi=NB\pir^2sin(\omegat) - one would not need to find the resistance per turn.)
Thanks Yosun for this kick-ass site! :)


NEC
sblmstyl
2008-10-15 21:39:49		thanks yosun!NEC
naama99
2006-11-29 21:16:46		What do you mean by \"one uses Ohm's Law in Faraday's Law"? Can you be more specific about it? It seems to me that you are taking the R given in the question and merely using it as L
Richard
2007-10-29 09:53:54		 I'm pretty sure she just means,
take Ohm's law V=IR and substitute the expression for the induced voltage given by Faraday's law:
EMF=-\frac{\partial \Phi_B}{\partial t}
Of course you need to take into account the number of turns...
NEC
radicaltyro
2006-10-28 21:53:31		You are missing the \pi in your final answer.Typo Alert!

Post A Comment!
You are replying to:
it says the coil starts at \theta = 0 which means \phi (0) = 0 and therefore a \sin function. \frac{d \phi}{d t} must therefore be a cosine. Do some algebra and you realize that it'll be something like 1.5^2, so it'll have something ~2.25 or 2.5. The only answer that fits the bill is E.

Username:
Password:
Click here to register.
This comment is best classified as a: (mouseover)
 
Mouseover the respective type above for an explanation of each type.

Bare Basic LaTeX Rosetta Stone
LaTeX syntax supported through dollar sign wrappers $, ex., $\alpha^2_0$ produces .
type this... to get...
$\int_0^\infty$
$\partial$
$\Rightarrow$
$\ddot{x},\dot{x}$
$\sqrt{z}$
$\langle my \rangle$
$\left( abacadabra \right)_{me}$
$\vec{E}$
$\frac{a}{b}$
 
The Sidebar Chatbox...
Scroll to see it, or resize your browser to ignore it...

All-Solutions List | Latest Comments | Unanswered Questions (Cries for Help!) |::| About

© 2005-2007 by Yosun Chang, All rights reserved.

This site is not affiliated with ETS, nor is it officially endorsed (yet) by ETS. This site is the work of an individual named Yosun Chang. The solutions, sans user comments and ETS questions, are © 2005 by Yosun Chang except where noted. All rights reserved. / The comments appending particular solutions are due to the respective users. / Educational Testing Service, ETS, the ETS logo, Graduate Record Examinations, and GRE are registered trademarks of Educational Testing Service. The examination questions are © 1997 and © 2001 by ETS.